Power tools for international B2B buyers
Power Tools for Importers, Distributors and OEM Brands.
Selected DCA and DongCheng models, export coordination and factory-supported OEM for professional buyers worldwide.
MarketsGlobal B2B
SupplyCurrent models and OEM
Buyer typeImporters and distributors
After-salesReplacement parts support
Representative models
Three tools to start the product conversation.
Review representative fastening, construction and cutting models, then open the full 30-product range.
Three procurement routes
Start with the supply path that fits the brief.
Use an existing model, review practical OEM options or discuss development feasibility.
Review the selected range.
Compare current DCA and DongCheng models by application, power source and confirmed reference specifications.
Browse ProductsAdapt a viable platform.
- Logo & Packaging
- Colour & Configuration
- Tooling & Development
Check feasibility before commitment.
Share the application, target market, quantity and development scope for an initial review.
Submit a Development BriefProduct evidence
Clean presentation backed by real supplied samples.
Product selection starts with accurate model imagery. Kit, case and physical-sample photos support configuration checks before quotation.
- Model and brand matched to the source material
- Configuration confirmed in the written quotation
- Technical documents checked for the destination market
What happens after an inquiry
A clear route from requirements to sample.
- 01Submit Requirements
Model or application, market, quantity and commercial needs.
- 02Configuration Review
Product version, kit, plug, packaging and document scope.
- 03Quotation
Commercial terms are prepared against the reviewed brief.
- 04Sample Confirmation
Sample scope and timing are agreed when required.
After-sales support
A practical parts-based warranty model.
Claim handling starts with product, batch and fault evidence. Approved parts are supplied for local repair, subject to the written order terms.
Read the Warranty & After-Sales Policy- Motor warranty
- 12 months
- Switch warranty
- 3 months
- Service method
- Parts supplied for buyer-led local repair
Buyer resources
Plan a stronger power tool program.
Practical guides for distributors, importers and private-label buyers comparing products, platforms and OEM requirements.
Power Tool OEM Guide
Understand customization levels, sample stages, tooling decisions and the information needed for a workable first quotation.
Read the OEM guideHow to Choose an Impact Wrench for Distribution
Read guideCordless vs Corded Tools for Wholesale Programs
Read guidePrivate Label Power Tool MOQ Guide
Read guideBattery Platform Buying Guide
Read guideStart with the requirement
Tell us the model, market and quantity.
We will review the supply path, configuration and documentation before quotation.
Selected product range
Tools organised around the work.
Browse selected DCA and DongCheng models by application, brand or power source. Freya private-label platforms are listed separately in OEM.
Market Demand ranks products by current buyer interest, application breadth and channel fit across international markets. It is not Freya's historical sales data.
No models match these filters.
Reset the filters or send us the application and market for a suitable product review.
20V cordless impact wrenchDCA ADPB520
A higher-torque cordless option for automotive service, assembly and demanding fastening work.
- Voltage
- 20V MAX
- Tightening torque
- 520 N·m
- Square drive
- 12.7 mm
Application fit
Built for demanding fastening work.
Automotive service
For tyre service, vehicle maintenance and workshop distribution channels.
Assembly work
For fastening tasks that require a higher-torque cordless platform.
Mobile maintenance
For teams working across vehicles, equipment and multiple work areas.
Core specifications
Values below apply to the ADPB520 reference model. Final kit contents are confirmed in the quotation.
- Battery voltage
- 20V MAX
- Maximum power output
- 450 W
- Net weight, bare tool
- 1.4 kg
- Square drive
- 12.7 mm (1/2 in)
- Tightening torque
- 350 / 420 / 520 N·m
- Nut-busting torque
- 682 N·m
- No-load speed
- 0-1,800 / 0-2,100 / 0-2,400 min⁻¹
- Impact rate
- 0-2,600 / 0-3,000 / 0-3,500 min⁻¹
- Standard bolt capacity
- M12-M20
Power
Drive and torque
Speed and capacity
Package and configuration
Quote the kit your channel needs.
Available batteries, charger plug, case, sockets, packaging and documentation are confirmed against the requested market and order version.
Reference material shows an S22 socket assembly, belt clip and plastic case. Local material also shows two 4.0 Ah batteries and a charger. Final contents remain subject to quotation.
Warranty support
- Motor
- 12 months
- Switch
- 3 months
Approved claims receive parts for repair by the buyer or local service technician.
Read the full policyModel-specific RFQ
Request ADPB520 pricing.
Include the market, quantity, battery kit, charger plug, packaging and accessory requirements.
OEM and private label
Build the right level of customization.
Start with branding and packaging. Move into appearance, engineering or customer-funded tooling when volume and feasibility support it.
BrandLogo, box and manual
AppearanceColour, labels and kit
EngineeringFunction and structure review
ToolingNew mould development
Factory OEM platforms
Choose a base model for private-label review.
These Freya factory-supported platforms are inquiry-led. Product performance, kit contents, branding, colour, packaging, charger, plug and documentation are confirmed in the quotation.
Indicative commercial ranges
Match development depth to order scale.
Final MOQ, cost and timing depend on the model, configuration, tests and production schedule.
Branding
Existing product with your brand
Logo, colour box and instruction-manual language on a current platform.
- Reference MOQ
- 100-500 units
- Typical sample path
- 7-20 days
Appearance
Colour or minor visual change
Specified body colour, labels, accessory combination or feasible local mould adjustment.
- Reference MOQ
- 500-1,000 units
- Typical development
- 3-6 weeks
Engineering
Function or structure modification
Changes involving components, performance, controls, safety or the supply chain.
- Reference MOQ
- 1,000-3,000+ units
- Timeline
- Case-specific
New tooling
Customer-funded OEM or ODM
New housing, die-cast parts, complex structures or a complete development project.
- Reference MOQ
- 3,000-10,000+ units
- Typical tooling
- 30-90 days
Indicative only. Every project is subject to product, engineering, compliance and production review.
A practical route from requirement to production.
- ReviewRequirement review
Market, target quantity, cost, customization and document needs.
- AssessFeasibility and quotation
Platform, MOQ, estimated tooling, tests and timing.
- ConfirmDrawing or sample approval
Appearance, configuration, artwork and technical decisions.
- DevelopTooling and T1
Mould development where required, first trial and revision.
- ProducePilot and mass production
Approval sample, small-batch validation and scheduled production.
Tooling agreement
Put ownership and exclusivity in writing.
A tooling agreement should define the operating rules before mould development begins.
- Tooling ownership after payment
- Storage, maintenance and production responsibilities
- Exclusive market and duration, if required
- Use of tooling for other customers
- Purchase threshold for any refund or offset
- Treatment when the project ends
Prepare for review
Send enough information for a realistic first answer.
Reference model or sampleDestination countryExpected quantityTarget price levelLogo, colour and packagingPlug and voltageCertification requirementsTarget development date